First, the concept: energy-saving gas burner As the name implies: to save energy of the burner, that is to do the same function less fuel burner. In other words, high thermal efficiency or high heat utilization of the burner. Including the detection of thermal efficiency, combustion rate, energy saving rate and other concepts.Usually fried stoves energy-saving methods are energy-saving stove, furnace energy, fried stoves and air-fire energy saving. Steam counters, steam stoves are usually steam engine energy. Energy saving is most common. Constant mining energy-saving stove is the use of energy-saving, energy-saving furnace with several energy-saving ways to combine, so energy-saving rate is quite high.
1. Burning rate:Refers to the full extent of fuel combustion, fuel combustion will not be completely black smoke, furnace bottom black, pungent eyes of the phenomenon of hot. Detection will be found in excessive smoke emissions.
2. Energy saving rate:Refers to the different stoves do the same work, consumption of fuel is not the same, the difference between the proportion of the gap. Under the same conditions, the higher the thermal efficiency of the stove heat efficiency than the low stove energy conservation rate is higher.
3. Thermal efficiency:In fact, the stove on the fuel utilization, the higher the utilization rate, thermal efficiency is high. Including the need to pay attention to whether the combustion is complete, heat absorption is good, with or without air burning, thermal insulation and other technologies. Blast-style Chinese fried stove's national thermal efficiency standard is 20%, 42% of fried stoves, steam cabinet is 40%. Generally very few kitchen manufacturers to standard energy-saving stoves.
4. Saving rate:To the daily or monthly fuel costs accounted for the proportion of turnover to calculate the proportion of saving money, such as diesel in the past cheap, and now added fuel tax, gas more cost-effective. If you use energy-saving burner even more
5. Festival rate:This is a new name, in fact, is to improve firepower, the same pot of water to shorten the time to boil it. For example, the original use of non-blower stove fire is small, with a blower after the burner consumption may remain unchanged or increase, but the time is shortened to save labor costs.
6. Air defense technology:Is to reduce the non-cooking time of the burning time, such as sub-dishes, add ingredients, such as washing time to turn off the fire. General liquid fuel, such as diesel stoves, alcohol-based stoves more difficult, gas stove will be better, the key is to fire a good stay. Now use (infrared, mechanical) solenoid valve to control, can be used with energy-saving burner, infrared sensor failure rate is higher, better pressure bar, mixed.
7. Steam generator technology:Change the heating mode of the stove for the fire row heating, coupled with electronic ignition, and with a smaller water pipe instead of the bottom of the pot, so you can reduce the volume of water, and the use of combustion exhaust heat to speed up the steam out of control flexible. The basic energy-saving 20-30%, the disadvantage is that the scale will be plotted in the water pipe at the plug, burned water pipes caused by leakage, the other electronic control, the fan part of the higher failure rate in recent years, more fashionable.